2wd 3speed atuomatic

**cincy_kick** · 01-05-2009, 11:20 AM

Ok I screwed up on the first post.... I have a 2wd 3speed automatic from a tracker for sale. $125 would prefer local pickup

hardluck · 01-05-2009, 11:35 AM

do you know the condition of this?

**cincy_kick** · 01-05-2009, 08:09 PM

you can come drive the car if you want. I drove it home a while ago and it did fine. i lokked in the wrong truck the first time i posted. we have 10 zukis in multiple locations and I got confused

hardluck · 01-06-2009, 06:45 AM

this is in a running tracker? interested in selling the engine also? where in Cincy are you?

**cincy_kick** · 01-06-2009, 08:42 AM

i live outside of Batavia, motor is not for sale only tranny and the rear end but I dont know the gearing on a 2wd rearend

John Deere · 01-06-2009, 08:49 AM

The gear ratio should be 4.30.

**cincy_kick** · 01-08-2009, 07:16 PM

still for sale

JamesD · 01-09-2009, 08:29 AM

If you decide to ship, how much to 71913. It is a business address. Thanks

**cincy_kick** · 01-09-2009, 10:42 AM

how would you want that shipped common carrier, ups and I guess I would have to drain the fluid to keep it from being a hazmat charge???

JamesD · 01-09-2009, 10:44 AM

I would assume that draining it would be the way to go. I wouldn't be concerned as to how it got here as long as the price is right.

**cincy_kick** · 01-09-2009, 08:15 PM

if you wanted to pay the 125 plus wwat ever it cost to ship i would ship it. but I dont have a business account with ups so i bet it would be expensive..

JamesD · 01-10-2009, 10:46 AM

Do you have any idea how much it weighs?

**cincy_kick** · 01-10-2009, 02:20 PM

i would say about 80 lbs my biggest concern is the hazmat

JamesD · 01-10-2009, 02:45 PM

I am going to post in the general section and see if someone has shipped an auto and see if they can add some insight from experience. Thanks

**cincy_kick** · 01-10-2009, 06:57 PM

not a problem

**zorproducts** · 01-11-2009, 08:54 AM

Yes I do it all the time. Put the TC/flex plate/Shift lever and cable in a separate box. Drain the TC & Trans. Wrap both in double plastic bags.

CK if every one else falls out of this deal I will send you a label to ship it to me. All you have to do is box, will pay for your time. I only want it complete so that means flex plate, TC, engine spacer, bolts from trans to engine, front part of drive shaft (I only want the first yoke and spline). Cable and shifter including cable to disengage shifter when brakes applied. TY let me know

I understand I came into this late so NHF.

MY

JamesD · 01-11-2009, 12:39 PM

Don't wait on me. If you want it Zorproducts, feel free. I can probably find one locally so feel free.

**cincy_kick** · 01-11-2009, 04:24 PM

ok sold. just got off the phone with MY> JamesD Thank you very much for your interest

**zorproducts** · 01-12-2009, 10:01 AM

Quote:

Originally Posted by JamesD

Don't wait on me. If you want it Zorproducts, feel free. I can probably find one locally so feel free.

Thanks, funny thing is Jackson and I almost picked one up on Saturday while in Phoenix junk yarding but I didn't want to pay over $200 for it. Then CK called and I got so excited that I think I am going to end up at around $350, LOL! I never said I was SMART, LOL!

MY

**cincy_kick** · 01-12-2009, 08:01 PM

$350 by the time you put the reciever on and the brush guards and the winch in that bumper it should be closer to 700....LOL....

skyhiranger · 01-12-2009, 08:52 PM

Quote:

Originally Posted by John Deere

The gear ratio should be 4.30.

Could be, but more than likely it will be 4.62.
As a general rule....if it has a 16V engine it will have 4.30s.....if it has an 8V engine it will have 4.62s, but a 94/95 could have 4.30s (even though it has an 8V engine).

**cincy_kick** · 01-13-2009, 07:29 AM

it was a 16v that that has a big hole in the block

01-05-2009, 11:20 AM	#1
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	2wd 3speed atuomatic Ok I screwed up on the first post.... I have a 2wd 3speed automatic from a tracker for sale. $125 would prefer local pickup __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-05-2009, 08:09 PM	#3
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	you can come drive the car if you want. I drove it home a while ago and it did fine. i lokked in the wrong truck the first time i posted. we have 10 zukis in multiple locations and I got confused __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-06-2009, 08:42 AM	#5
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	i live outside of Batavia, motor is not for sale only tranny and the rear end but I dont know the gearing on a 2wd rearend __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-08-2009, 07:16 PM	#7
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	still for sale __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-09-2009, 10:42 AM	#9
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	how would you want that shipped common carrier, ups and I guess I would have to drain the fluid to keep it from being a hazmat charge??? __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-05-2009, 11:35 AM	#2
hardluck Join Date: Apr 2007 Location: Lynchburg, OH Posts: 12 Rep Power: 0	do you know the condition of this?

01-06-2009, 06:45 AM	#4
hardluck Join Date: Apr 2007 Location: Lynchburg, OH Posts: 12 Rep Power: 0	this is in a running tracker? interested in selling the engine also? where in Cincy are you?

01-06-2009, 08:49 AM	#6
John Deere Join Date: Oct 2007 Location: Cinti. Ohio Posts: 108 Rep Power: 1213	The gear ratio should be 4.30.

01-09-2009, 08:29 AM	#8
JamesD Join Date: Dec 2008 Location: Little Rock/Hot Springs AR Posts: 22 Rep Power: 0	If you decide to ship, how much to 71913. It is a business address. Thanks

01-09-2009, 10:44 AM	#10
JamesD Join Date: Dec 2008 Location: Little Rock/Hot Springs AR Posts: 22 Rep Power: 0	I would assume that draining it would be the way to go. I wouldn't be concerned as to how it got here as long as the price is right.

01-09-2009, 08:15 PM	#11
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	if you wanted to pay the 125 plus wwat ever it cost to ship i would ship it. but I dont have a business account with ups so i bet it would be expensive.. __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-10-2009, 10:46 AM	#12
JamesD Join Date: Dec 2008 Location: Little Rock/Hot Springs AR Posts: 22 Rep Power: 0	Do you have any idea how much it weighs?

01-10-2009, 02:20 PM	#13
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	i would say about 80 lbs my biggest concern is the hazmat __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-10-2009, 02:45 PM	#14
JamesD Join Date: Dec 2008 Location: Little Rock/Hot Springs AR Posts: 22 Rep Power: 0	I am going to post in the general section and see if someone has shipped an auto and see if they can add some insight from experience. Thanks

01-10-2009, 06:57 PM	#15
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	not a problem __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-11-2009, 08:54 AM	#16
zorproducts God blessed America Join Date: Jan 2006 Location: Camp Verde, AZ Posts: 5,047 Rep Power: 9698	Shipping an auto trans. Yes I do it all the time. Put the TC/flex plate/Shift lever and cable in a separate box. Drain the TC & Trans. Wrap both in double plastic bags. CK if every one else falls out of this deal I will send you a label to ship it to me. All you have to do is box, will pay for your time. I only want it complete so that means flex plate, TC, engine spacer, bolts from trans to engine, front part of drive shaft (I only want the first yoke and spline). Cable and shifter including cable to disengage shifter when brakes applied. TY let me know I understand I came into this late so NHF. MY __________________ Products for Zuki 4x4s. T-BRA, MY-SIDE1 & 2 SIDEDRAFT systems,THONG, SUPORT BRA, SNATCH "the best t-case cradle". The "Upskirt 2 inch kick/tracker lift. Bumpers! That little bullseye over to the left? Give me reputation and I will be happy! http://zuksoffroad.com Stay outta my tree! And the tree next to my tree and the trees next to that! Or any tree made out of wood!

01-11-2009, 12:39 PM	#17
JamesD Join Date: Dec 2008 Location: Little Rock/Hot Springs AR Posts: 22 Rep Power: 0	Don't wait on me. If you want it Zorproducts, feel free. I can probably find one locally so feel free.

01-11-2009, 04:24 PM	#18
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	ok sold. just got off the phone with MY> JamesD Thank you very much for your interest __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-12-2009, 08:01 PM	#20
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	$350 by the time you put the reciever on and the brush guards and the winch in that bumper it should be closer to 700....LOL.... __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

01-13-2009, 07:29 AM	#22
cincy_kick Join Date: Jul 2007 Location: Cincinnati,ohio Posts: 662 Rep Power: 1447	it was a 16v that that has a big hole in the block __________________ 96 tracker/kick: 16v,3spd auto, hard top, daily driver 93 sidekick: 8v, stainless steel header w/ 2" exhaust,k&n filter, 5 speed, 2" spacer lift, 30x9.5x15 m/t,4dr brakes, hard top,ZOR front & rear bumpers w/8000# smittybuilt 95 4dr kick 5speed,k&n filter, 2 inch body lift,2 inch spacer lift, raised tank, 31"mudders, ZOR front W/ 8000# smittybuilt, custom rear bumper

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2wd vs 4wd w/tcase Tranny ??	CruZuk	Tracker/Sidekick/Grand Vitara/X-90 forums	33	02-06-2009 07:36 AM
2wd tracker 5 speed	cincy_kick	Parts & Accessories For Sale	3	01-05-2009 11:17 AM
2WD front axle	zukinoobi	Wanted Ads	3	07-28-2008 05:27 PM
94 tracker 2wd	Joe S.	Vehicles For Sale	8	07-09-2008 10:57 AM
2wd or 4wd Steering Box??	87sammy	Yota Swap Tech	10	04-21-2008 03:35 PM