Go Back   Zukikrawlers > Technical > Build-up Garage
Photo Gallery Home Forum FlashChat Email

Build-up Garage Showcase your build up! If you are building it, we want to see it!

Reply
 
Thread Tools Display Modes
Old 10-28-2017, 08:28 PM   #126
Reddog1
 
Reddog1's Avatar
 
Join Date: Aug 2006
Location: El Dorado, California
Posts: 5,579
Rep Power: 78000
Reddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond reputeReddog1 has a reputation beyond repute
As I said, there are advantages.
__________________
'91 EFI, DD, Hardtop, Partial EXO, A/C, Warn 8000 winch, 100 AMP GM Alt, Toy Celica P/S, TT YJ SPOA M/L, 5-leaf YJ, DT 8000 shocks, TT Knuckle Over Steering, Mighty Kong, 6.5 TC, Evil Twins, TT Full Skid Plate, Diff Guards, Fuel Tank Skid, Rock Sliders, Anti-Wrap Bar w/Axle Truss, Panhard Bar, Cooper SST - 30x9.5x15, 8" wide 2-1/2" BS wheels, Maxima rear Disc w/ebrake, rear locker, Thumb Throttle, CB Radio, towed 4 down








Reddog1 is offline   Reply With Quote
Old 12-07-2017, 11:26 PM   #127
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Haven't really gotten much done. The new job keeps me pretty occupied. As well as my 10 month old son and 4yr old daughter.

I noticed some cracks under the passenger seat starting to form a couple of weeks ago. I drilled some holes at the ends of the cracks to keep them from growing.





There are a couple of things I feel contributed to this.
Number 1 - Thirty Year Old Truck
Number 2 - Previous owner installed pipe flange seat risers
Number 3 - Sidekick Seat swap

I used my harbor freight to patch up the cracks. It went surprisingly well.





I sprayed some paint over it and on the underside of the tub and called it finished.



If I see the cracks opening or new ones forming I'll add some more metal underneath the seat mounts/sliders.

I've been noticing a bit of vibration recently as well. It became especially evident between 15-20mph recently. I had chalked this up to the new tires.
I changed my transmission oil.
I inspected the transmission mount.

And I glanced over at the rear drive shaft and noticed a shiny spot.



My u-joint was completely destroyed!



I've continued to be impressed by this vehicle. Even with this completely destroyed U-Joint the Samurai did 70mph+! The vibration was hardly noticeably above 30mph.

The flanges are pretty well ground in one the forward direction. The remaining u-joint held together well enough to keep my going forward.

I dropped it off at Bill Englewood Driveshaft and he was able to get the flanges swapped out and I had my driveshaft back the next day.




I'm still trying to battle noise inside the Samurai. I picked up some Boom Mat to put in some key areas of the tub to see if it helps. I'll keep you all posted!
DETN8R is offline   Reply With Quote
Old 01-12-2018, 04:36 PM   #128
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
I've been battling road noise in the Samurai. I thought that getting the hard top would get the noise down to what I'd consider a reasonable level for the road trips I take with the family.

I started out with purchasing an 8 pack of some 12x12 DEI Boom Mat. DEI states that 100% coverage isn't necessary and that 25%-50% should yeild the same results.
I started by removing the seats and all the carpet. I cleaned the tub of the Samurai with simple green and paper towels.

I put one full sheet under each front seat and in each front floor pan. I put 2.5 sheets underneath the rear seat. I split one sheet and put half on each side of the transmission tunnel.









I reinstalled the carpet and drove it for a couple of days. This small amount of boom mat yielded some small but noticable results.
Enough that I felt justified to order another 8 pack of boom mat as well as DEI's Under Carpet Light. A 48"x70" sheet.

I added some more boom mat to each firewall, the top of the transmission tunnel beneath the heaterbox. I added some to the vertical surfaces above each wheel.
I split one sheet between both wheel wells. During this time my daughter was playing with my phone so I did not get many pictures of the added boom mat.
I started cutting the Under Carpet lite, focusing on the front of the samurai. I spend more time in here than my family since I drive it daily.



I placed a full sheet inside each door.

DETN8R is offline   Reply With Quote
Old 01-12-2018, 04:37 PM   #129
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
My daughter also helped me remove the seats this time around. Afterwards she hung around to play on my phone and keep me from taking pictures.



I used some cardboard to make a template for the transmission tunnel.






I tried to completely enclose the tranmission/transfercase tunnel with the undercarpert lite.





I had a nice piece leftover that almost covered the rear of the samurai underneath the rear seat so I begin reinstalling the carpet.






After all this work, which wasn't much, this has yielded some significant results. I'm pretty happy with it.

I'm beginning to suspect some more transmission problems. I've been hearing a whine that goes away whenever I press in the clutch. I figured this was the throwout bearing.
Some more knowledgeable folks have said that it's the input bearing so I believe I may be having louder than usual transmission noise.
My EGR Failure code has also been ever present for the last few weeks. I picked up another head because I suspect my headgasket may be failing too. Sweet smelling exhaust...



While I had the doors taken apart I decided to try swapping in the window channel from the same 4dr sidekick from the junkyard that I got the head from. It's ok.
DETN8R is offline   Reply With Quote
Old 01-13-2018, 03:41 PM   #130
Bad Goat
 
Join Date: Nov 2015
Location: Eugene, Oregon
Posts: 42
Rep Power: 0
Bad Goat is an unknown quantity at this point
Nice attention to detail. Did you try pulling the drive shafts to check the u joints? My middle shaft felt fine in the truck, but when I took the shaft out they were really stiff. There was almost no grease left when I pulled them. my tin top was a lot quieter now.
Bad Goat is offline   Reply With Quote
Old 01-22-2018, 10:27 PM   #131
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
I probably should pull the other drive shafts but I haven't gotten around to it.
Maybe before I head to Moab for EJS
DETN8R is offline   Reply With Quote
Old 04-23-2018, 10:26 PM   #132
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
I've got a bit of an update. I was very tentative about going to Easter Jeep Safari this year but I wanted to get some things done just in case.

I was never satisfied with the way I mounted the power steering reservoir.



I had it mounted above the drivers side fender in front of the air intake. after thinking about it for some time I decided to mount it on the radiator above the power steering box. Unfortunately this meant that I needed to relocate the coolant reservoir/overflow bottle. I don't like committing to mods (in case they don't work) and I love to have options. So I ordered another drivers side radiator mount from Tony with Highway 83 Suzuki.

I cut off the radiator clip and drilled a 1/4" hole through an already existing hole in the metal welded to the back of the radiator clip from the mount. This holed lined up nicely with a hole on the passenger side radiator mount, allowing me to simply bolt this clip to the radiator mount. I attached my coolant reservoir and ran a longer line from the top of the radiator and I was done!







With the area above the power steering box freed up I was able to begin making a simple bracket to attach the power steering fluid reservoir.

I used a 3/4"x1/8" piece of aluminum flat stock to attach the reservoir to existing holes in the drivers side radiator mount.



I ran new lines from the bottom of the reservoir to the power steering box and a new line from the return of the pump. I used some spiral wrap around the hoses to keep them from kinking and collapsing by keeping even pressure all around the hoses. This did not work so well when I went to MOAB.



The new mount fit pretty nice with the air box installed.



Some time passed before I finally committed to going to Moab. Once we made plans to go I knew I need to get some things done.

When I got the hard top I had to lose the roof rack and my CB Antenna mount. I was skeptical about getting the roof rack back on with the hard top before heading out so I used my time to wrap up other lose ends. My son helped me fabricate a new CB Antenna mount days before heading out. I used some angle iron to make the mount bolt to the old tire carrier mounts.



I used the bandsaw to trim the excess material and make it look sleek.



I painted it black with some bedliner. (No Pic at the moment)

Somehow I had KINKED the hose for the windshield wiper fluid again! I fixed this before heading out and modifying the roof rack to fit with the hard top.



I decided to try using some sugru to seal some holes in the hard top. It worked pretty well. I was afraid it would not cure next to the (vulcanized?) rubber seals on the hard top but it did.



I had an idea to raise the rear of the roof rack enough to clear the rear piece of the hard top, which was the reason I removed the roof rack. I had to modify the windshield bracket supports to clear the front piece of the hard top. To raise the rear of the roof rack I drilled one hole on each side to put the u-bolts that support the roof rack higher than the original position. This worked quite well!





With the roof rack mounted it was time to get packing. Like last year we took the car as well. So we were able to split all the gear between the two vehicles.

With the vehicles packed we headed out LATE for Moab/Grand Junction.



To supplement the road communications I purchased a couple of Baofeng UV-5R's for the trip. One for the Samurai and one for Abby's car so that we could keep in touch.



We stayed at Abby's parents in Grand Junction since we got in so late (1AM).

The next day we grabbed some lunch before heading out to Moab. I left the doors and rear glass at Abby's parents because the weather was warm enough. As soon as we got into Moab I started having trouble shifting. I asked my nephew to drive the Samurai to the gas pump and he was able to back out of the parking spot but could not get it back into 1st.

We went to Kane Creek campground and got a site. After getting camp set up and dinner going me and my nephew Jason got to swapping out the clutch cable with a spare so that we could go wheel Day Canyon with EJS in the morning.





We woke up the next morning and begin heading to the meeting spot for the EJS group running Day Canyon. I guess we were running late because we never saw the group. But on the way to the meeting spot the Samurai was making a squealing noise. We popped the hood and saw that power steering fluid was leaking out of the reservoir. We had to loosen the radiator support when we swapped out the clutch cable and must have caused the power steering hose to kink and fluid started spilling out. This was an easy fix but annoying.

With the group nowhere to be found we decided to the run the trail ourselves.



Moab is beautiful and we enjoyed the trail.

Back in camp the kids were having fun playing in all of the dirt at Kane Creek campground.





We returned Easter Sunday, once again running extremely late. We had missed the raffle and all the vendors at EJS but it was a fun trip none the less.
DETN8R is offline   Reply With Quote
Old 04-23-2018, 10:27 PM   #133
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
In other news. I've acquired some leaf springs.

I got a set of stock YJ leafs from someone on craigslist a couple months ago.



I also picked up some Old Man Emu 2" HD springs as well.



I don't have the bracketry to run the YJ's but I think I could easily run the OME springs. I'd just need some longer shocks.

I've noticed some pretty bad rust on the exterior of the body underneath the passenger rear fender brackets. I'm almost committed to attempting the virtual lift.
DETN8R is offline   Reply With Quote
Old 04-24-2018, 09:42 AM   #134
Diesel_Zuk
 
Join Date: Nov 2013
Location: Provo, UT
Posts: 473
Rep Power: 18332
Diesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond reputeDiesel_Zuk has a reputation beyond repute
Lookin good Fred. You gonna go YJ's or just the 2" springs?
__________________
1986 Soft top TDI truck conversion
http://www.pirate4x4.com/forum/suzuk...onversion.html
1987 tin top, aka "lil blacky" -sold
Bunch of other random samurais- sold
Diesel_Zuk is offline   Reply With Quote
Old 04-27-2018, 12:31 AM   #135
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
I'm not sure. I really don't know what will give me more lift. an my long term goal is 35's.

I just found some body rust under my rear fender brackets.So I may go with the virtual lift.
DETN8R is offline   Reply With Quote
Old 05-18-2018, 06:22 PM   #136
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Another update!



After MOAB my brakes started grinding pretty bad. This was out of nowhere but not completely unexpected since I have not had to do the brakes since I bought the Samurai in 2015. The rear drum brakes went easy enough. Probably the easiest drum brake job I've ever done.

The front's were a little harder. I had to drive to two separate auto parts stores to get the pads and the shoes. When I got the tires off and examined one the rotors the passenger side was pretty horrible. Probably the worst rotor I've ever seen.











I could not find rotors in stock anywhere in town. Finally I gave in and started calling brake shops to get them turned. I got them turned at PepBoys downtown.

Looked way better after having them turned.







I knew I'd be doing some extensive mods to the Samurai this year. I started with remounting my turn signals inside the grill and removing the portion of the crossmember that extended from the frame to in front of the tires. I used a pipe cutter to get a straight cut. My son helped out!















With that done I decided it was finally time to remove the rear fender flare mounts. One of them was rusted pretty bad and I needed to assess any rust on the body.















I was not happy about this.... I expected some surface rust maybe but not gaping holes. This isn't the worst rusted samurai that I've seen but this one was mine.



I covered the rust with some spraypaint for a week while I thought it over....
DETN8R is offline   Reply With Quote
Old 05-18-2018, 06:25 PM   #137
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Finally I said screw it.

I picked up some trailer fenders from the trailer supply store in town. I'd go with the virtual lift route.







I picked up a sheet metal nibbler that attaches to my drill, some more sheet metal, a roll on raptor liner kit and committed to completing the drivers side fender first because I'm still not sure how I want to work around the gas filler hose.











Removing the boom mat was a bit of a pain. I found that by balling it up I could stick it to the remaining boom mat on the body and pull it free.











The Samurai is first and foremost my family vehicle. I would need to notch the fender to clear the rear seat.







I busted out my harbor freight and cut some sheet metal and got to work.















I used some seam sealer to cover the gaps and seal out the elements. I used some bondo to to fill in my horrible sheet metal welding skills. The Samurai body is PAPER THIN! and I'm not the best . I used a orbital sander to smooth the bondo out.







At first I was planning on just mixing up a small amount of the raptor liner so that I could save it. After a while I figured that I would paint the lower part of the drivers side door too.







I sprayed some adhesion promoter on the bare metal parts and rolled on the raptor liner. I couldn't be happier with the results and I can't wait to get the other side done.















The carpet still mostly fits in the back of the Samurai, the seat still fits. The seatbelt is pretty tight between the wheel well and the seat but still works fine.



Now, I'm driving around with the drivers side done and the passenger side, with the worst rust is still how it was. I'm a little nervous to work around the gas filler and tank but I'll tackle it in a week or two. Not sure when I'll get the front done.
DETN8R is offline   Reply With Quote
Old 05-19-2018, 09:14 PM   #138
Bowie Kid
 
Join Date: Oct 2009
Location: Northern Az, Az
Posts: 626
Rep Power: 8828
Bowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond reputeBowie Kid has a reputation beyond repute
Good job! That came out really good.
__________________
1987 tintop, VW 1.6td, Giles Super Pump, 5 speed, 6.5, yj's, e-lockers, 33's on Yotas.
1992 Tracker 31x10.50's, welded rear , 2" body, 2.5" RRO susp lift.
2-LJ10's
1990 Diahatsu Rocky 1.9td, Track/kick trans-tcase, 4.24's, Toys, yj's, front m/l shackle reverse, 33's, built in the ZOR shop.



[/IMG]
Bowie Kid is offline   Reply With Quote
Old 05-20-2018, 05:15 PM   #139
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Thanks!
DETN8R is offline   Reply With Quote
Old 06-17-2018, 11:32 PM   #140
td57
 
Join Date: Apr 2012
Location: Forks, Wa
Posts: 13
Rep Power: 0
td57 is an unknown quantity at this point
How's the other side doing?
I like what you doing here - Looks clean...
td57 is offline   Reply With Quote
Old 06-18-2018, 08:13 PM   #141
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
The other side is still rusted stock.

I'm ready to do it just waiting on some clear weather days.
DETN8R is offline   Reply With Quote
Old 08-03-2018, 02:03 AM   #142
rovinson
 
Join Date: Mar 2018
Location: Jacksonville, FL
Posts: 17
Rep Power: 0
rovinson is an unknown quantity at this point
Good work, dude! Any updates and pics?
rovinson is offline   Reply With Quote
Old 08-03-2018, 11:17 AM   #143
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Thanks for following Rovinson,

I'm a scatter brain. I haven't gotten around to doing the wheel well on the other side yet.

I picked up another hard top with the fold up rear glass and I had a failed attempt at replacing the curved side window.

I've picked up just about all the parts I need to add air conditioning to the samurai and have been waiting on parts for that. I'll post a proper update soon.

I always post updates on Instagram if you're interested in following the progress there.

http://www.instagram.com/DETN8R
DETN8R is offline   Reply With Quote
Old 08-03-2018, 11:18 AM   #144
DETN8R
 
Join Date: Apr 2015
Location: Denver, Co
Posts: 86
Rep Power: 280
DETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond reputeDETN8R has a reputation beyond repute
Thanks for following Rovinson,

I'm a scatter brain. I haven't gotten around to doing the wheel well on the other side yet.

I picked up another hard top with the fold up rear glass and I had a failed attempt at replacing the curved side window.

I've picked up just about all the parts I need to add air conditioning to the samurai and have been waiting on parts for that. I'll post a proper update soon.

I always post updates on Instagram if you're interested in following the progress there.

http://www.instagram.com/DETN8R
DETN8R is offline   Reply With Quote
Old 08-03-2018, 10:56 PM   #145
Stook
 
Join Date: Sep 2013
Location: Paso Robles, CA
Posts: 241
Rep Power: 1016
Stook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond reputeStook has a reputation beyond repute
Didn't know you had an instagram. Just followed you. Keep up the work!
__________________
Stook is offline   Reply With Quote
Old 08-08-2018, 02:07 AM   #146
rovinson
 
Join Date: Mar 2018
Location: Jacksonville, FL
Posts: 17
Rep Power: 0
rovinson is an unknown quantity at this point
Quote:
Originally Posted by DETN8R View Post
Thanks for following Rovinson,

I'm a scatter brain. I haven't gotten around to doing the wheel well on the other side yet.

I picked up another hard top with the fold up rear glass and I had a failed attempt at replacing the curved side window.

I've picked up just about all the parts I need to add air conditioning to the samurai and have been waiting on parts for that. I'll post a proper update soon.

I always post updates on Instagram if you're interested in following the progress there.

http://www.instagram.com/DETN8R
Cool. Will follow you on IG.
rovinson is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale 1986 Suzuki Samurai JX onequickgt Vehicles For Sale 4 03-26-2014 04:14 PM
1986 Suzuki Samurai JX Tin Top Original divn4$ Vehicles For Sale 3 04-30-2012 08:57 PM
87 suzuki samurai stocker dadstoybox Ebay & Craigslist Items 20 11-15-2010 03:58 AM
suzuki samurai 87 thecookiemonster Technical Section 7 08-15-2010 10:21 PM
87 samurai part out! another one knunns Parts & Accessories For Sale 31 02-05-2010 03:13 AM


All times are GMT -5. The time now is 10:58 PM.

design by Themes by Design

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2005-2017 Zukikrawlers.com