yanking the pos heater

NotSoPC · 02-23-2012, 03:47 PM

So I am pulling out the whole heater set up and don't have a book. I just need to know what and were the bolts are to get it lose. Its going in the trash when done so I don't care if it gets busted up doing so. Thinking right not about just using the swazall on it.

metal leg · 02-23-2012, 03:50 PM

I think there was a video of Shorty ripping one out in about 13 seconds.

Maybe hit him up for some pointers.

rockmike · 02-23-2012, 03:56 PM

if I recall correct..there was just a stud on the fire wall.remove the cable controls,heater hoses,that nut on the stud in the engine compartment,blower wires and yank and cuss and yank ,get all pissed off about it cut your hands all up and cuss some more

zuk rider · 02-23-2012, 06:57 PM

why pull it out? if you solve a couple few issues, they will run you out of the truck they get so hot!

LiftedZuki · 02-23-2012, 07:12 PM

If you can clean it thru a hole just pull it clean it and new heater core and don't work it under a tree and it works great.

NotSoPC · 02-23-2012, 10:13 PM

Quote:

Originally Posted by zuk rider

why pull it out? if you solve a couple few issues, they will run you out of the truck they get so hot!

Quote:

Originally Posted by LiftedZuki

If you can clean it thru a hole just pull it clean it and new heater core and don't work it under a tree and it works great.

Motor is

and the PO painted over the controls. Whole thing is junk. Got one to put in its place that I got from summit. Also going to block off the vent in the cowling.

derekAV · 02-24-2012, 01:35 AM

Quote:

Originally Posted by metal leg

I think there was a video of Shorty ripping one out in about 13 seconds.

Maybe hit him up for some pointers.

http://www.youtube.com/watch?v=VJYZfdC4RQ8

**dadstoybox** · 02-24-2012, 02:01 AM

yep,glad they didn't want to reuse that one

derekAV · 02-24-2012, 02:42 AM

I took mine out also. i used a similar technique in the video but didnt totally destroy it

Im going to clean it up and put it back in some day

NotSoPC · 02-25-2012, 02:29 AM

Quote:

Originally Posted by derekAV

http://www.youtube.com/watch?v=VJYZfdC4RQ8

Haha I plan on keeping the dash it when I remove mine. Sawzall and some junk blades should work. Being doing it as soon as I am done with the front toy axle.

02-23-2012, 03:47 PM	#1
NotSoPC Join Date: Jun 2010 Location: Milton WA Posts: 915 Rep Power: 35001	yanking the pos heater So I am pulling out the whole heater set up and don't have a book. I just need to know what and were the bolts are to get it lose. Its going in the trash when done so I don't care if it gets busted up doing so. Thinking right not about just using the swazall on it. __________________ Avoid arguments with females about lifting the toilet seat........use the sink. Tag- quarter horse, work in progress, full time four hoof drive 87 Soft Top "Samantha" YJ's, yotas, hy-steer, 6.5's, 33" SSR's, blah blah blah...... (Sold )

02-23-2012, 03:50 PM	#2
metal leg Join Date: Jan 2008 Location: Collinsville, IL Posts: 5,283 Rep Power: 172646	I think there was a video of Shorty ripping one out in about 13 seconds. Maybe hit him up for some pointers. __________________

02-23-2012, 03:56 PM	#3
rockmike Krawler Join Date: Mar 2007 Location: Pasco, wa. Posts: 17,980 Rep Power: 229340	if I recall correct..there was just a stud on the fire wall.remove the cable controls,heater hoses,that nut on the stud in the engine compartment,blower wires and yank and cuss and yank ,get all pissed off about it cut your hands all up and cuss some more __________________ ~Union Rules~ Proud member of the bigflex padders union Local 10001 There are obstacles and there are obstacles with consequences..... Zuk people rule! in Honor of our fallen brothers.R.I.P. brothers pie zero VB I'd rather be out wheelin thinkin about God,than sittin in a church on Sunday thinkin about wheelin.

02-23-2012, 06:57 PM	#4
zuk rider Join Date: Feb 2008 Location: denver co Posts: 1,880 Rep Power: 7459	why pull it out? if you solve a couple few issues, they will run you out of the truck they get so hot! __________________ 2011 Xterra PRO4X. 6MT. Stock with rear diff cover and home made roof rack. Flashboiler snow bashing approved!

02-23-2012, 07:12 PM	#5
LiftedZuki Join Date: Oct 2008 Location: TriCities, WA Posts: 6,625 Rep Power: 62750	If you can clean it thru a hole just pull it clean it and new heater core and don't work it under a tree and it works great. __________________ 1998 V6 4x4 Tacoma 1981 lj81 cab truggy build- 1uz/a340/fj 9.5 axles 1980 lj80 in a million parts www.lj10.com

02-24-2012, 02:01 AM	#8
dadstoybox THE MOTIVATOR Join Date: Sep 2007 Location: Marlow,Okla. Posts: 46,859 Rep Power: 268723	yep,glad they didn't want to reuse that one __________________ ~*Union Rules* All the women in the world gave birth to children while my mother gave birth to a LEGEND DTB Enterprises Haul-A-Round Trailer Mfg. Well Lit Offroad Lighting QuadCarrier Proud member of the bigflex padders union Local 10001 pie RIP Brother Zero WTSS FOREVER

02-24-2012, 02:42 AM	#9
derekAV Join Date: May 2010 Location: Apple Valley CA / Fairfield ca Posts: 1,702 Rep Power: 23056	I took mine out also. i used a similar technique in the video but didnt totally destroy it Im going to clean it up and put it back in some day __________________ Tank of gas=$25 Food=$15 Pulling out a Jeep=Priceless!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolant heater install	daverbmxer	Suzuki Engine	15	05-28-2011 11:40 AM
VW Van Heater Installation into my Zuk	ZombieZuki	Technical Section	14	01-11-2011 12:22 AM
Sammy cold? Do the heater cleanout!	flashboiler	Technical Section	18	01-26-2009 05:56 PM
My heater sucks!!!	sthmstr	Technical Section	94	12-17-2008 10:48 PM
Heater	TEXCRAWLER	Technical Section	45	12-04-2007 10:56 PM