View Full Version : Toy Power Steering

01-13-2011, 09:50 PM
I bought the full kit used about a year ago. I ended up going with a PSC pump/bracket. I have the toy celicia pump, bracket, idle pulley, some stock celicia hoses (I felt they are to short). This does not come with the stearing box. I replaced the shaft seal on the pump when I got it and continued to have a squirting leak from the front shaft when at full lock. I did not put a full rebuilt kit in it. Got tired of messing with it and was thinking it wasn't going to be powerful enough for my set up so went with an aftermarket.

What you will need to complete this kit;
stearing box/adapter plate
low pressure return hose
low pressure feeder hose

I had a hose shop make my hoses (that are on my zuk) with repairable fittings for about $100. The rest of it I got from the autowreckers.

$75 (OBO/make a offer) plus shipping from Tacoma WA. This has been sitting on my bench and I would like it to be used by someone.

01-18-2011, 10:16 PM
65 bucks and I'll pay shipping.

02-04-2011, 01:15 PM
still available.