PDA

View Full Version : Homeade kicker/6.5 Sami tcase


wheresmyhat
08-05-2008, 03:09 PM
Location
Graham, Wa 98338

Contact
Nathan
253-691-8760
eddingsnathan@hotmail.com


If you know Holeshot or his buildups you know how meticulous he is when he is fabricating or building something.

I bought his homeade kicker setup awhile back when he switched to a 4.3l setup. He cut the front output shaft off and plated the tracker tcase. The samurai tcase is not mated but is bolted solidly to the tracker tcase and using a cut down shaft. Overall length is 5 1/2 inches longer then a stock setup. This was in his buggy so the rear was linked and coiled. Comes with a centerforce clutch setup also and the tracker tcase has stock gearing.

The tcase is trail gears 6.5 with complete rebuild kit and the replacement front output shaft necessary when switching to the lower gear set. Its sitting on a DIY weld together tcase bucket. He has only ran synthetic oil in both and never has had anyproblems.

He was running the 16v/tracker 5speed/tracker tcase/ 6.5 sami tcase / toyota axles with 5.29 R&P/ 36 - 38 inch tires.

I paid $1200.00 for the whole setup and that is what I am asking for it.

I will separate the tcase for $800.00

I will ship the tcase only. Shipping will be around $50.00 with the bucket attached. I will take paypal but the fee is around $36.00 just for the price of the tcase so I would be willing to split the difference.

Anyone interested let me know. This goes to whoever pays first. I will not hold it until you talk to your wife. :funny:

Nathan

WVhillbilly
08-06-2008, 06:50 PM
Seen that set up when I was lurking at Holeshot's house fer a day. Top notch, he has serious fab skills. I don't need it but if you do its worth the price bigok

ford381stroker
08-06-2008, 07:08 PM
got any pics? i am interested

wheresmyhat
08-06-2008, 10:48 PM
Heres the pics.



http://www.zukikrawlers.com/albums/wheresmyhat/kicker_002.jpg

2
If you rotate the sammi tcase clockwise and line it up with the three bolts you will see that it attaches there and also below it.
http://www.zukikrawlers.com/albums/wheresmyhat/kicker_003.jpg
3
Front output shaft of the tracker tcase cut and plated.
http://www.zukikrawlers.com/albums/wheresmyhat/kicker_004.jpg
4
This tcase has some serious beef bolted around it.
http://www.zukikrawlers.com/albums/wheresmyhat/kicker_005.jpg
5

http://www.zukikrawlers.com/albums/wheresmyhat/kicker_006.jpg
6

http://www.zukikrawlers.com/albums/wheresmyhat/kicker_007.jpg
7