Wheel question

[BobA]

If I run 31" tires what amount of backspacing is needed for the rims. And what are the lug pattern or measurement for zuki axles?

[purevil71]

Lug pattern is 5 on 5.5
As far as your B/S for 31's goes, it depends on how wide of a tire your going to run. When I had 31x10.5's I had some old Ford Truck rims and they worked fine and had little B/S
When I got my 33x13.5 Swampers I had some rubbing issues, so I had to run a 2" B/S wheel to clear them.
I also had some rubbing issues with my 36's, but I'm running spacers to solve that problem.
hope this helps!!!

[plepper]

I have 2 1/2" backspacing on 8X15 rims with 31x10.50's with no rubbing lug pattern is 5x5.5 same as Ford or Jeep. Standard backspacing is 3 3/4 for rims this size. I got my rims from Wheelers but Trail Tough, and Summit Racing also have them.

[BobA]

Was wondering if the rims and tires off my grand cherokee would work .I think they're 4.5 backspacing with 31/10-50's and I'll measure the lugs when the rain stops.

[Zee]

I believe the Jeeps have a 5x4.5 bolt pattern,so they won't fit.
And there is little chance that 4 1/2 BS will work on a Zuk,and still be able to turn lock to lock with a 31/10.50 tire.
Z

[Zee]

Check out this thread.
http://www.zukikrawlers.com/showthread.php?t=1432

[BobA]

Thanks for the info.Guess I'll sell them when I part out my jeep.

[purevil71]

Thanks for the info.Guess I'll sell them when I part out my jeep.

Got any pix? I think those might fit my Ranger and I'm getting bored with the stock rims anway...lol

[BobA]

Got any pix? I think those might fit my Ranger and I'm getting bored with the stock rims anway...lol
Heres a link http://community.webshots.com/album/549351388VfkRLm