PDA

View Full Version : Parting out 95 tracker 4x2 auto in KY


gearhead6s
06-06-2008, 11:49 PM
Purple with fairly straight body and nice interior pieces. No motor, ECU or harness, this was the doner for my sami. Its 2 wheel drive automatic estimated 100k miles, speedo cable broke 2 years ago at 68k. I have a lot of stuff pulled out already and will be going on ebay this sunday. Let me know what you need and I can get you pics and prices.

zukii
06-08-2008, 09:39 AM
Looking for the turn signal assembly that is on the steering column. I am in Louisville too. Shoot me a PM, let me know if you have it.

Thanks.

JKDK
06-08-2008, 11:35 PM
What gear ratio is it? If it is the 5:12 I need a price shipped to 38024

thanks
Josh

zooker
06-14-2008, 02:31 AM
What gear ratio is it? If it is the 5:12 I need a price shipped to 38024

thanks
Josh
X2, I'm just down the road from a bit.

gearhead6s
06-15-2008, 01:40 AM
i don't know the ratio how can i find out and let you know?

phloop
06-15-2008, 01:59 AM
It most likely has 5.12 gears in the rear axle which will not fit in a Sami axle.


How nice are the head light's? Might be interested in them.

gearhead6s
06-15-2008, 02:07 AM
both are in great shape from what i can remeber right now, i need to look at the mounting tabs on the driver's side because it looks a little pushed in but it could be the bumper thats messed up. I know both lenses are great.

phloop
06-15-2008, 02:24 AM
What I am looking for are the lenses if they are seperat from the bucket.

zorproducts
06-15-2008, 08:51 PM
How much for the 2wd auto,flex plate, front part of rear DS (do not need entire DS), torgue converter, trans to engine bolts, shifter , etc?? I will send labels for shipping so no bother other than calling ups for pickup of your box.

MY

gearhead6s
06-16-2008, 01:39 AM
What I am looking for are the lenses if they are seperat from the bucket.

I will pull them out tomorrow and take a look

How much for the 2wd auto,flex plate, front part of rear DS (do not need entire DS), torgue converter, trans to engine bolts, shifter , etc?? I will send labels for shipping so no bother other than calling ups for pickup of your box.

MY

I know the trans to engine bolts are gone(mixed in bucket with misc bolts), the shifter cable was cut when the engine/trans was pulled, and the tranny cooler rubber lines were cut also. Other than that I think I still have it all how's $300 sound for all the auto specific stuff that you need for the swap that I have? And I have a business address for a pick-up if that helps you on your shipping cost.

zorproducts
06-16-2008, 11:13 AM
PM sent