PDA

View Full Version : plain old bumper

Skut
04-24-2006, 08:35 PM
i have a length of 3 1/2 by 3 1/2 square tubing for a rear bumper and i was looking at how to mount it. no idea! i need a few suggestions.
i noticed the body mounts in the back under the tail gait, lookin to use those
anything is appreciatedthispicis
Sally
04-24-2006, 08:41 PM
look at how he mounted this
http://www.izook.com/tech/samurai/bumper/diyrbmpr/diyrbmpr.htm
muskyslayr
04-24-2006, 08:45 PM
that aint fair, I need a machine like that...ha ha

I used the stock hitch holes...you'll have to ask Marshall how it works once he gets it mounted...

http://i40.photobucket.com/albums/e232/muskyslayr/ibuiltbumpers003.jpg
Skut
04-24-2006, 08:50 PM
so where does that mount? i whent outside and took a look at my sami and i think my YJ suspension takes up that mounting hardwear.

nice welds by the way
muskyslayr
04-24-2006, 08:56 PM
yeah, you might be right... I'm not sure how your kit mounts...
Skut
04-24-2006, 09:48 PM
http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=57164901&imageID=684741553&MyToken=36bc33f7-b85b-47c9-9221-a6f75fe05336
Itsmejoe231
04-24-2006, 09:57 PM
You can still mount a bumper there.
http://x402.putfile.com/4/11322004978.jpg

I mounted it there on the bottom and also on the Body mounts at the tail gate.
mahana79
04-25-2006, 09:59 AM
I extended and boxed in my frame when I did mine.

here is the bumper

http://www.zukikrawlers.com/albums/mahana79/DSC00003a.sized.jpg


Here is the best shot of the mounting.

http://www.zukikrawlers.com/albums/mahana79/DSC00004_001.sized.jpg

http://www.zukikrawlers.com/albums/mahana79/DSC00002.sized.jpg
Skut
04-25-2006, 06:23 PM
im a little confused how you mounted that if u have more pics can you post them.
thanks guys keep it commin
BUDWIISER
04-28-2006, 10:31 AM
Here's a few pictures of how I did mine.... let the bashing begin :-)

http://www.zukikrawlers.com/albums/BUDWIISER/rearbumper01.jpg
BUDWIISER
04-28-2006, 10:51 AM
http://www.zukikrawlers.com/albums/BUDWIISER/rearbumper02.jpg

http://www.zukikrawlers.com/albums/BUDWIISER/rearbumper03.jpg
Itsmejoe231
04-28-2006, 10:25 PM
let the bashing begin :-)


Why? That is a solid bumper and mount. toast
BUDWIISER
04-29-2006, 09:12 AM
Why? That is a solid bumper and mount. toast

Oh, it just never fails. See, I don't trust my own welding on something that needs to be that sturdy, so my buddy's'll do it for me. When they're done, they usually say... "well, it ain't perty", and my response is usually... "will it hold?" Just get a good laugh outta that.

But, you're right, it's extremely solid. Thanks to Eddie!
Marshall
05-02-2006, 10:37 PM
Yeah, nothing wrong with that mount COONASS :rofl:

Just had to say something.