PDA

View Full Version : Carb Questions and Problems


SamuraiZR2
04-06-2006, 10:33 AM
I just got my carb rebuilt... but the thing is, whoever had my samurai before me butchered it. I have not idea where all the vaccum lines and stuff go. I think more than half my vaccum lines were gone when I took it off. Is there any kind of picture or diagram that I can look at to fix mine... or do any of ya'll have any information or anything to help me out with this????

Thanks

Zee
04-06-2006, 07:29 PM
Go here and download the FSM,this one has it in a searchable or in 3 parts.
Z

http://www.hardcore4x4.net/fsm/

joejna
04-21-2006, 05:33 PM
hey guys i had my Samurai installed a new weber carburator and it was working fine the first day but yesteraday the day after i installed it when i accelerate the suk it keeps accelerated and i put like a temporary thing a spring to pull down the lever to get it from accelerating but i know there has to be a way to work correctly with out that spring......

irideablackbike
04-23-2006, 03:57 PM
you might want to try putting some grease on the part of the carb where throttle is supposed to slide on another flat part of metal. Sorry this is so unspecific. I'll make a better post a little later after I can accurately describe it. I had the exact same problem.

joejna
04-25-2006, 10:34 AM
ok i will apreciate it