PDA

View Full Version : spider trac pan hard with yotas and YJs?


elotsip
03-31-2006, 04:02 PM
Will the spider trax panhard bar fit if you are running the TT yj kit and toytoa axles? Thinking this might make my steering better...

Itsmejoe231
03-31-2006, 04:07 PM
Not sure if it will fit but a panhard bar will definately make your steering better. It will not correct bump steer but will let it track straight.

POWERSTROKEN
03-31-2006, 05:44 PM
Yes it will fit. I am currently running the same setup and wouldn't consider running without it.

Skut
03-31-2006, 05:53 PM
looks like a good idea. where does it bolt on? i have TT YJ kit too. so I GATTA KNOW

POWERSTROKEN
04-01-2006, 01:47 PM
One thing you will have to do is to modify the YJ ubolt plate and the panhard bar mount where it mounts to the ubolt plate as they are different. I just cut the part off the Zuk plate for the panhard bar and welded it to the TT YJ plate.

elotsip
04-02-2006, 02:07 PM
Cool, thanks for the info. I think this is something I will do when I do the axles swap.

dbrown
04-02-2006, 03:40 PM
anyone have a link on where I can buy one?

Itsmejoe231
04-02-2006, 03:46 PM
http://www.spidertrax.com/s.nl/sc.2/category.119/it.A/id.1228/.f