PDA

View Full Version : measurements needed


shorty
03-12-2006, 01:29 PM
I have started laying out how I am going to build my next toy and I really need some measurements to get the design to an exacting shape instead of guessing at the final result.

How long & wide are:
Geo metro 3 cyl (tranny mounting surface to front pulley)
Sammy 5 speed (engine mounting surface to rear seal)
SM465 & NP208 combo (Bellhousing mounting surface to rear output shaft housing)

Thanks for any help that you can give!!

Once I get the measurements and inptu them into my design, I will be posting pictures of the cage/body.

01rededge
03-12-2006, 01:51 PM
Shorty - I'll see about getting the 5 speed measurement for ya - I've got one sitting outside.

TatorZuk
03-12-2006, 04:06 PM
How long & wide are:
Geo metro 3 cyl (tranny mounting surface to front pulley)
Thanks for any help that you can give!!

15"...on the nose exactly to the front of the pulley.

shorty
03-12-2006, 06:50 PM
That is better than I had thought... I figured it to be about 18-20" so this is great.

Thank you very much!!

01rededge
03-12-2006, 07:03 PM
Shorty - The tranny is 23 3/4" from adapter plate to the rear seal.

shorty
03-12-2006, 07:29 PM
Thanks a LOT!!

Roach2004
03-12-2006, 09:07 PM
I cant help you man but why is my zuki on your avatar?

shorty
03-12-2006, 10:31 PM
I cant help you man but why is my zuki on your avatar?

Because I BUILT it....




That and I have to get a better pic to send Tx_Zuki, he has a magical touch with computers that I do NOT...

Sally
03-12-2006, 11:03 PM
found this on google :mrgreen:

http://i29.photobucket.com/albums/c271/D2theJ/Copyofshortys_towing_logoCustom.jpg

TX_ZUKI
03-12-2006, 11:21 PM
Thanks Sally, I changed it, hope he likes it bigok found this on google :mrgreen:

http://i29.photobucket.com/albums/c271/D2theJ/Copyofshortys_towing_logoCustom.jpg

shorty
03-13-2006, 12:01 AM
I love it!!!



now if I could only find where you put the smilies at... They use to be an easy link right beside where you post.

TX_ZUKI
03-13-2006, 07:37 AM
I love it!!!



now if I could only find where you put the smilies at... They use to be an easy link right beside where you post.
Oh Damn! I am not helping you with anything, last time I did that we lost the whole site! bartmoon


You really can't see the smileys on the right of the page after you hit reply?

shorty
03-13-2006, 01:21 PM
Nope... I surely would have used a certain few last night!!

Yeah, I was gonna say... don't get too far into it... I like haven the site up and running.

EDIT: While posting in NWS I noticed down at the lower left hand of my post screen it has a place to disable the smilies, but mine are turned on. So I clicked on the smilie word and it brought up a list showing the smilies and such as... So I wonder if I should go back and EDIT my reply to show ecaxtly how I feel!!! LOL

LATER!! waving